http://support.kbs-coatings.com/ Support Forum - KBS Coatings » Tag: BlackTop - Recent Topics en Sun, 14 Mar 2010 22:28:47 +0000 http://support.kbs-coatings.com/topic/1965#post-2648 Mon, 08 Jun 2009 19:44:17 +0000 indstyleperf 2648@http://support.kbs-coatings.com/ <p>I had the same 'flash rust' issue as some others. On my '68 C-10 frame, I spent a few months sandblasting it. It was completely bare steel. I AquaKlean'd and RustBlast'd it just to be sure I killed any slight rust and greasy hand prints from handling it. Well, I thought I screwed up bigtime. After RustBlasting it and drying it in the sun and w/ compressed air, it had dark grey and goldish streaks all over it. But I wasn't about to spend another 3 months eating sand.<br /> Well, the RustSeal directions say you can go over rust and this was nothing so I went for it. I brushed on one coat of RustSeal and it laid out very nicely. I figured one coat should be fine since it coated 95+% and I was Blacktopping too. I then sprayed on one med. coat of Blacktop, reduced by 10% w/ #1, to get it to lay out. Man, did it ever! It looks awesome! Ridiculously glossy! I can't believe how far it went: 1/2 qt. of RustSeal and just over 1/2 qt. of BlackTop to do the entire frame, inside and out, top and bottom!<br /> No issues I can see with bubbling or anything like that. I can even see the camera I used to take pics of it in the crossmember! Awesome stuff!<br /> Next up is the frame on my daily driver to beat the MI winters!<br /> Sorry for being so windy but I had to convey this to those that see the same issues.<br /> Amazing stuff! </p> http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/87#post- Sun, 14 Mar 2010 17:28:47 +0000 Anonymous @http://support.kbs-coatings.com/