http://support.kbs-coatings.com/ Support Forum - KBS Coatings » Tag: RustBlast - Recent Topics en Sun, 01 Aug 2010 08:13:31 +0000 http://support.kbs-coatings.com/topic/2039#post-2861 Fri, 14 May 2010 03:00:12 +0000 Herbs 2861@http://support.kbs-coatings.com/ <p>G'day, I'm looking to coat a landcruiser gearbox, transfer case and bellhousing, is the rust seal (along with rust blast and aqua klean) compatible with cast aluminium? Plus, would you recommend a top coat over the rust seal since the gearbox does cop a fair bit of abuse?</p> <p>Cheers,</p> <p>Hurell </p> http://support.kbs-coatings.com/topic/2020#post-2807 Sun, 28 Feb 2010 01:34:03 +0000 twum_au 2807@http://support.kbs-coatings.com/ <p>Hi,<br /> I am trying to treat a rust problem in the rear cargo area of my Mazda van.<br /> The rust affects about 10% of the floor area.<br /> I had the whole floor plastic bead blasted which got rid of all remaining paint, the bulk of the rust and enlarged the few holes that I discovered. There are dozens of small pinholes and a few holes 50mm in diameter or smaller.<br /> The blasting guy told me to paint the whole floor with rust converter, let it cure (2 days) then power wire wheel the whole floor which I did.<br /> I am taking the van to a panel shop next to get the holes welded closed/patched (no filler will be used).<br /> I read your directions and I think I need to use Rustblast then Rustseal Galvanised steel with maybe a little Numetal putty for smoothing the patched areas.<br /> Is this all I need to do? </p> http://support.kbs-coatings.com/topic/1992#post-2715 Sun, 18 Oct 2009 05:59:23 +0000 bambookoo 2715@http://support.kbs-coatings.com/ <p>Hi </p> <p>i used rust blast and after cleaning i can see some light rust spots left. should i treat it again or can i use the rust seal over it?</p> <p>thanks </p> http://support.kbs-coatings.com/topic/1993#post-2716 Mon, 19 Oct 2009 14:42:46 +0000 beetle 2716@http://support.kbs-coatings.com/ <p>I've just completed the Rust Blast surface prep of my bike's tank. The Rust Blast was in the tank for 50 mins, and the tank was rolled every few minutes to allow full coverage. After draining and flushing, I noted that all the 'rust' colored stuff was gone, but there is quite a bit of very hard black looking rust remaining. Will the tank sealer adhere to this stuff, or should I look at giving it another Rust Blast treatment? </p> http://support.kbs-coatings.com/topic/1965#post-2648 Mon, 08 Jun 2009 19:44:17 +0000 indstyleperf 2648@http://support.kbs-coatings.com/ <p>I had the same 'flash rust' issue as some others. On my '68 C-10 frame, I spent a few months sandblasting it. It was completely bare steel. I AquaKlean'd and RustBlast'd it just to be sure I killed any slight rust and greasy hand prints from handling it. Well, I thought I screwed up bigtime. After RustBlasting it and drying it in the sun and w/ compressed air, it had dark grey and goldish streaks all over it. But I wasn't about to spend another 3 months eating sand.<br /> Well, the RustSeal directions say you can go over rust and this was nothing so I went for it. I brushed on one coat of RustSeal and it laid out very nicely. I figured one coat should be fine since it coated 95+% and I was Blacktopping too. I then sprayed on one med. coat of Blacktop, reduced by 10% w/ #1, to get it to lay out. Man, did it ever! It looks awesome! Ridiculously glossy! I can't believe how far it went: 1/2 qt. of RustSeal and just over 1/2 qt. of BlackTop to do the entire frame, inside and out, top and bottom!<br /> No issues I can see with bubbling or anything like that. I can even see the camera I used to take pics of it in the crossmember! Awesome stuff!<br /> Next up is the frame on my daily driver to beat the MI winters!<br /> Sorry for being so windy but I had to convey this to those that see the same issues.<br /> Amazing stuff! </p> http://support.kbs-coatings.com/topic/1955#post-2603 Mon, 11 May 2009 09:30:20 +0000 brubzy 2603@http://support.kbs-coatings.com/ <p>The bottom of my Jeep door is a little rusted out, can this product help with stopping the rust and sealing it? Is it easy to use? </p> http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/ http://support.kbs-coatings.com/topic/51#post- Sun, 01 Aug 2010 03:13:31 +0000 Anonymous @http://support.kbs-coatings.com/