http://support.kbs-coatings.com/ Support Forum - KBS Coatings » Topic: Rust seal & welding question en Fri, 12 Mar 2010 16:39:24 +0000 http://support.kbs-coatings.com/topic/1969#post-2661 Mon, 22 Jun 2009 18:50:33 +0000 KBS Coatings 2661@http://support.kbs-coatings.com/ <p>Please email <a href="mailto:sales@kbs-coatings.com.au">sales@kbs-coatings.com.au</a> for availability in Oz. </p> http://support.kbs-coatings.com/topic/1969#post-2660 Mon, 22 Jun 2009 18:24:34 +0000 motoxray 2660@http://support.kbs-coatings.com/ <p>That looks perfect.<br /> Thanks.<br /> Is this product available in Oz, or is it US only purchase? </p> http://support.kbs-coatings.com/topic/1969#post-2659 Mon, 22 Jun 2009 08:05:12 +0000 KBS Coatings 2659@http://support.kbs-coatings.com/ <p>You could use the Underseal Spray Gun and Probe. You can find it here: <a href="http://www.kbs-coatings.com/Underseal-Spray-Gun-amp-Probe_p_37.html" rel="nofollow">http://www.kbs-coatings.com/Underseal-Spray-Gun-amp-Probe_p_37.html</a></p> <p>Let us know if you think that will work. </p> http://support.kbs-coatings.com/topic/1969#post-2658 Mon, 22 Jun 2009 00:00:18 +0000 motoxray 2658@http://support.kbs-coatings.com/ <p>I have a 1952 FX Holden I am restoring. I am replacing the outer sill panels as they are moderately rusted, with some small holes. I planned on coating the inner sill surfaces with rust seal. </p> <p>My question is, do you have any thought/suggestions re coating the welded inner portions of the panels? </p> <p>I had thought of using a spray nozzle &#38; accessing the inside of the sill through some holes drilled through the inner sill panel, much in the manner of rust proofing practice. These holes would them be sealed with rubber plugs. While this is not necessarily a 'perfect' solution, it's the best I can think of at present.<br /> Any ideas would be appreciated.<br /> Ray </p>