http://support.kbs-coatings.com/ Support Forum - KBS Coatings » Topic: extractors en Sun, 01 Aug 2010 08:09:20 +0000 http://support.kbs-coatings.com/topic/1973#post-2681 Mon, 13 Jul 2009 08:37:31 +0000 KBS Coatings 2681@http://support.kbs-coatings.com/ <p>NuMetal will withstands temps up to 300°F (150°C). It does not appear that NuMetal would work for your High Temperature application. </p> http://support.kbs-coatings.com/topic/1973#post-2677 Sat, 11 Jul 2009 19:06:23 +0000 ronny 2677@http://support.kbs-coatings.com/ <p>Hi,<br /> Sorry for the delay. The max temp would be 700deg/c.<br /> If it was possible, once the filler was cured would it be able to withstand sandblasting process.<br /> Thanks. </p> http://support.kbs-coatings.com/topic/1973#post-2673 Mon, 06 Jul 2009 07:43:55 +0000 KBS Coatings 2673@http://support.kbs-coatings.com/ <p>What is the maximum temperature that you need the NuMetal to withstand? </p> http://support.kbs-coatings.com/topic/1973#post-2672 Sat, 04 Jul 2009 08:32:09 +0000 ronny 2672@http://support.kbs-coatings.com/ <p>Hi,<br /> Can numetal be used as filler to smooth out welds or inperfections on heads or extractors. Will it be affected by high temperatures or any type of coating system such as ceramic.</p> <p>Thanks </p>